The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
TRADE-MARK INDUSTRIAL INC.
- Address:
-
250 ROYAL OAK RD
CAMBRIDGE, ON
Canada
N3E 0A4 - Products/Services:
-
Power Piping Installation ASME B31.1 (SHOP & FIELD)
Status: 01-13-2023
Number: QA-00900
Fabrication, assembly and repair of power piping at the above location and fabrication, assembly, erection and repair of power piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping.
Process Piping Installation ASME B31.3 (SHOP & FIELD)
Status: 01-13-2023
Number: QA-00901
Fabrication, assembly and repair of process piping at the above location and fabrication, assembly, erection and repair of process piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping.
Boiler & Pressure Vessel Repair/Alteration (SHOP & FIELD)
Status: 01-13-2023
Number: QA-00902
Repair and alteration of boilers, pressure vessels, piping and A, B, E and H type fittings at the above location and for repairs and alterations at field sites controlled by this location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Refrigeration Piping Installation ASME B31.5 (SHOP AND FIELD)
Status: 01-13-2023
Number: QA-04505
Fabrication, assembly and repair of refrigeration piping at the above location and fabrication, assembly, erection and repair of refrigeration piping at field sites controlled by the above location in accordance with CSA Standard B52, Mechanical Refrigeration Code and ASME B31.5 Refrigeration Piping.
Medical Gas Piping Installation CSA-Z7396.1 (SHOP & FIELD)
Status: 01-13-2023
Number: QA-04506
Fabrication, assembly and repair of nonflammable medical gas piping at the above location and fabrication, assembly, erection and repair of nonflammable medical gas piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and CSA-Z7396.1 Nonflammable Medical Gas Piping Systems.
ASME PP-2-Section I Boiler External Piping (SHOP & FIELD)
Status: 01-13-2023
Number: QA-04954
Fabrication and assembly of pressure piping at the above location and field sites controlled by the above location in accordance with ASME Boiler and Pressure Vessel Code, Section I, and CSA Standard B51, Boiler, Pressure Vessel, and Pressure Piping Code.
CSA-B51 Fittings
Status: 01-13-2023
Number: QA-05024
Fabrication of Welded and Non-Welded Category A, B and H type Fittings only at the Above Location Only. In accordance with CSA Standard B51 Boiler, Pressure Vessel and Pressure Piping Code.
Hot Tapping and Line Stopping
Status: 01-13-2023
Number: QA-06021
Hot Tap of pressure equipment at field sites controlled by the above location only in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Contact(s)