The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
ROCK TECHNICAL SOLUTIONS
- Address:
-
177 SAMUEL ST
SARNIA, ON
Canada
N7T 7L3 - Products/Services:
-
ASME U-1-Mfr. of Sec. VIII, Div 1 Pressure Vessels (SHOP ONLY)
Status: 03-31-2023
Number: QA-10033
Manufacture of pressure vessels at the above location only in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Boiler & Pressure Vessel Repair/Alteration (SHOP & FIELD)
Status: 03-31-2023
Number: QA-04186
Repair and alteration of boilers, pressure vessels, piping and A, B, C, E and H type fittings at the above location and for repairs and alterations at field sites controlled by this location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Power Piping Installation ASME B31.1 (SHOP & FIELD)
Status: 03-31-2023
Number: QA-04187
Fabrication, assembly and repair of power piping at the above location and fabrication, assembly, erection and repair of power piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping.
Process Piping Installation ASME B31.3 (SHOP & FIELD)
Status: 03-31-2023
Number: QA-04188
Fabrication, assembly and repair of process piping at the above location and fabrication, assembly, erection and repair of process piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping.
CSA-B51 Fittings
Status: 03-31-2023
Number: QA-04258
Fabrication of Welded and Non-Welded Category A, B, E and H type Fittings only at the Above Location Only. In accordance with CSA Standard B51 Boiler, Pressure Vessel and Pressure Piping Code.
ASME PP-2-Section I Boiler External Piping (SHOP & FIELD)
Status: 03-31-2023
Number: QA-04916
Fabrication and assembly of pressure piping at the above location and field sites controlled by the above location in accordance with ASME Boiler and Pressure Vessel Code, Section I, and CSA Standard B51, Boiler, Pressure Vessel, and Pressure Piping Code.
Contact(s)