Please note that the information within this directory is only updated periodically and may not accurately reflect the most recent information available for each entry. If you have a question or concerns regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
ONTARIO POWER GENERATION, DARLINGTON NUCLEAR DIVISION
- Address:
-
HOLT ROAD SOUTH
BOWMANVILLE, ON
Canada
L1C 3W2 - Products/Services:
-
Pressure Relief Valve Repair Organizations
Status: 8/31/2019
Number: QA 00656
Repair of ASME Section I, IV, & VIII, Div.1, pressure relief valves using original equipment manufactured parts at the above location only in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code. Special processes are limited to Machining. Test media shall include Steam, Air/Gas and Liquid.
Power Piping B31.1
Status: 4/15/2020
Number: QA 00795
Fabrication, assembly and installation of power piping at the above location only. In accordance with CSA Standard B51-09, Update 1, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1-2010 Power Piping.
Process Piping B31.3
Status: 4/15/2020
Number: QA 00796
Fabrication, assembly and installation of process piping at the above location only. In accordance with CSA Standard B51-09, Update 1, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3-2010 Process Piping.
Refrigeration Piping B31.5
Status: 4/15/2020
Number: QA 00797
Fabrication, assembly and installation of refrigeration piping at the above location only. In accordance with CSA Standard B52-05, Mechanical Refrigeration Code and ASME B31.5-2010 Refrigeration Piping.
Repair and Alteration Organizations
Status: 4/15/2020
Number: QA 00798
Repair and alteration of boilers, pressure vessels, piping and Category A, B, C, D, E, F & H type fittings at the above location only. In accordance with CSA Standard B51-09, Update 1, Boiler, Pressure Vessel and Pressure Piping Code.
Fitting Manufacturers
Status: 4/15/2020
Number: QA 00799
Fabrication of Welded and Non-Welded Category A, B & H type Fittings only at the above location only. In accordance with CSA Standard B51-09, Update 1, Boiler, Pressure Vessel and Pressure Piping Code.
Nuclear Vessels, Pumps, Valves and Piping Systems
Status: 4/15/2020
Number: QA 00846
Construction of Class 1, 1C, 2, 2C, 3 & 3C Piping Systems; Shop Assembly; as a Material Organization Supplying Ferrous and Nonferrous Material. At the Above Location Only. In accordance with CSA Standard N285.0-08 Update 1 & 2, with Annex M General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants and ASME Code Section III 2010 Edition, 2011 Addenda.
Nuclear Parts, Appurtenances, Piping Subassemblies, Containments and Tubular Products
Status: 4/15/2020
Number: QA 00847
Construction of Class 1, 1C, 2, 2C, 3, 3C & 4 Parts and Piping Subassemblies; at the Above Location Only. In accordance with CSA Standard N285.0-08 Update 1 & 2, with Annex M General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants and ASME Code Section III 2010 Edition, 2011 Addenda.
Nuclear Supports
Status: 4/15/2020
Number: QA 00848
Construction of Class 1, 1C, 2, 2C, 3, 3C & 4 Welded and Non-welded Supports; With and Without Design Responsibility at the Above Location Only. In accordance with CSA Standard N285.0-08 Update 1 & 2, with Annex M General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants and ASME Code Section III 2010 Edition, 2011 Addenda.
Nuclear Fittings
Status: 4/15/2020
Number: QA 00849
Construction of Class 1, 1C, 2, 2C, 3, 3C & 4 Welded and Non-welded Category A, B & H type Fittings at the Above Location Only. In accordance with CSA Standard N285.0-08 Update 1 & 2, with Annex M General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants and ASME Code Section III 2010 Edition, 2011 Addenda.
Nuclear Pressure Relief Valve Repair
Status: 8/31/2019
Number: QA 02021
Repair of nuclear Class 1, 2 & 3 pressure relief valves using original equipment manufactured parts at the above location only in accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants. Special processes are limited to Machining. Test media shall include Steam, Air/Gas and Liquid.
Nuclear Repair, Modification or Replacement
Status: 4/15/2020
Number: QA 04145
Repair, Modification or Replacements of Class 1, 1C, 2, 2C, 3, 3C & 4 Nuclear Items at the Above Location Only. In accordance with CSA Standard N285.0-08 Update 1 & 2, with Annex M General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants and ASME Code Section III 2010 Edition, 2011 Addenda.
Map
Contact(s)