The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
MATRIX NORTH AMERICAN CONSTRUCTION LTD
- Address:
-
3196 MAINWAY
BURLINGTON, ON
Canada
L7M 1A5 - Products/Services:
-
ASME A-1-Section I Boiler Assembly (FIELD ONLY)
Status: 44857.1666666667
Number: QA-03170
Assembly of power boilers at field sites controlled by the above location only in accordance with ASME Boiler and Pressure Vessel Code, Section I, and CSA Standard B51, Boiler, Pressure Vessel, and Pressure Piping Code.
ASME H-6-Section IV Boiler Manufacture (FIELD ONLY)
Status: 44857.1666666667
Number: QA-03171
Heating boilers except cast iron at field sites controlled by the above location only in accordance with ASME Boiler and Pressure Vessel Code, Section IV and CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
ASME U-6-Sec. VIII, Div 1 Pressure Vessel Mfr. (FIELD ONLY)
Status: 44857.1666666667
Number: QA-03172
Manufacture of pressure vessels at field sites controlled by the above location in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Power Piping Installation ASME B31.1 (FIELD ONLY)
Status: 44857.1666666667
Number: QA-00827
Fabrication, assembly and erection of power piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping.
ASME PP-3-Section I Boiler External Piping (FIELD ONLY)
Status: 44857.1666666667
Number: QA-06001
Fabrication and assembly of pressure piping at field sites controlled by the above location in accordance with ASME Boiler and Pressure Vessel Code, Section I, and CSA Standard B51, Boiler, Pressure Vessel, and Pressure Piping Code.
Process Piping Installation ASME B31.3 (FIELD ONLY)
Status: 44857.1666666667
Number: QA-00828
Fabrication, assembly and erection of process piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping.
Boilers & Pressure Vessels Repair/Alteration (FIELD ONLY)
Status: 44857.1666666667
Number: QA-02942
Repair and alteration of boilers, pressure vessels, piping and A, B, C, E and H type fittings at field sites controlled by the above location only in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Refrigeration Piping Installation ASME B31.5 (FIELD ONLY)
Status: 44857.1666666667
Number: QA-03169
Fabrication and assembly of refrigeration piping at field sites controlled by the above location only in accordance with CSA Standard B52, Mechanical Refrigeration Code and ASME B31.5 Refrigeration Piping.
Contact(s)