The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
MAC-WELD MACHINING LTD
- Address:
-
1324 LOUGAR AVE
SARNIA, ON
Canada
N7S 5N7 - Products/Services:
-
Process Piping Installation ASME B31.3 (SHOP ONLY)
Status: 44959.2083333333
Number: QA-06052
Fabrication, assembly and repair of process piping at the above location only in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping.
CSA-B51 Fittings
Status: 44959.2083333333
Number: QA-06053
Fabrication of Welded and Non-Welded Category A, B, C, E, F and H type Fittings only at the Above Location Only. In accordance with CSA Standard B51 Boiler, Pressure Vessel and Pressure Piping Code.
Power Piping Installation ASME B31.1 (SHOP ONLY)
Status: 44959.2083333333
Number: QA-06051
Fabrication, assembly, and repair of power piping at the above location only in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping.
Contact(s)