The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
HOOPER WELDING ENTERPRISES LIMITED
- Address:
-
1389 & 1390 ADVANCE ROAD
OAKVILLE, ON
Canada
L6L 6L6 - Products/Services:
-
CSA-B51 Fittings
Status: 02-03-2023
Number: QA-06152
Fabrication of Welded and Non-Welded Category A, B, C, D, E, F and H type Fittings only at the Above Location Only. In accordance with CSA Standard B51 Boiler, Pressure Vessel and Pressure Piping Code.
ASME S-2-Section I Boiler Manufacture (SHOP & FIELD)
Status: 02-03-2023
Number: QA-6
Manufacture and assembly of power boilers at the above location and field sites controlled by the above location in accordance with ASME Boiler and Pressure Vessel Code, Section I, and CSA Standard B51, Boiler, Pressure Vessel, and Pressure Piping Code.
Process Piping Installation ASME B31.3 (SHOP & FIELD)
Status: 02-03-2023
Number: QA-01076
Fabrication, assembly and repair of process piping at the above location and fabrication, assembly, erection and repair of process piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping.
Power Piping Installation ASME B31.1 (SHOP & FIELD)
Status: 02-03-2023
Number: QA-01077
Fabrication, assembly and repair of power piping at the above location and fabrication, assembly, erection and repair of power piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping.
ASME U-4-Sec. VIII, Div 1 Pressure Vessel Mfr. (SHOP & FIELD)
Status: 02-03-2023
Number: QA-01078
Manufacture of pressure vessels at the above location and field sites controlled by the above location in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
ASME UM-4-Sec. VIII, Div 1 Miniature Pressure Vessels (SHOP & FIELD)
Status: 02-03-2023
Number: QA-01079
Manufacture of miniature pressure vessels at the above location and field sites controlled by the above location in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Boiler & Pressure Vessel Repair/Alteration (SHOP & FIELD)
Status: 02-03-2023
Number: QA-04201
Repair and alteration of boilers, pressure vessels, piping and A, B, C, D, E, F and H type fittings at the above location and for repairs and alterations at field sites controlled by this location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
ASME U2-3-Sec. VIII, Div 2 Pressure Vessel Mfr. (SHOP & FIELD)
Status: 02-03-2023
Number: QA-01080
Manufacture of pressure vessels at the above location and field sites controlled by the above location in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 2 and CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Contact(s)