The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
FRAMATOME CANADA LTD
- Address:
-
865 BROCK RD
PICKERING, ON
Canada
L1W 3J2 - Products/Services:
-
ASME U-4-Sec. VIII, Div 1 Pressure Vessel Mfr. (SHOP & FIELD)
Status: 05-26-2024
Number: QA-10110
Manufacture of pressure vessels at the above location and field sites controlled by the above location (this certificate does not cover impregnated graphite) in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
CSA-B51 Fittings
Status: 05-26-2024
Number: QA-03685
Fabrication of Welded and Non-Welded Category A, B, C, D, E, F and H type Fittings only at the Above Location Only. In accordance with CSA Standard B51 Boiler, Pressure Vessel and Pressure Piping Code.
Power Piping Installation ASME B31.1 (SHOP & FIELD)
Status: 05-26-2024
Number: QA-10111
Fabrication, assembly and repair of power piping at the above location and fabrication, assembly, erection and repair of power piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping.
Process Piping Installation ASME B31.3 (SHOP & FIELD)
Status: 05-26-2024
Number: QA-03684
Fabrication, assembly and repair of process piping at the above location and fabrication, assembly, erection and repair of process piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping.
Material Organization (MO) (Can be added to N/NPT)
Status: 05-26-2024
Number: QA-10127
Material Organization supplying ferrous and nonferrous material at 81 Osborne Rd, Courtice, ON, L1E 2R3 controlled by the above location only. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
CSA-N285.0 Nuclear Fittings (SHOP ONLY)
Status: 05-26-2024
Number: QA-446
Construction of Class 1, 1C, 2, 2C, 3, 3C & 4 welded and non-welded Category A, B, C, D, E, F & H type fittings for which overall responsibility is retained at the above location and for which fabrication and installation are subcontracted to appropriate Certificate Holders. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
CSA-N285.0 Nuclear Item Repair, Modification or Replacement (FIELD ONLY)
Status: 05-26-2024
Number: QA-04291
Field Repairs, Modifications or Replacements of Class 1, 1C, 2, 2C, 3, 3C & 4 nuclear items at CNSC licensed field sites for which overall responsibility is retained at the above location and for which repairs, modifications and replacements are subcontracted to appropriate Certificate Holders. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
N Type Subcontracting
Status: 05-26-2024
Number: QA-10128
Construction of Class 1, 1C, 2, 2C, 3, 3C & 4 Vessels, Welded and Non-Welded Supports for which overall responsibility is retained at the above location and for which fabrication and installation are subcontracted to appropriate Certificate Holders. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
Contact(s)