The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
FRAMATOME CANADA LTD
- Address:
-
925 BROCK RD
PICKERING, ON
Canada
L1W 2X9 - Products/Services:
-
ASME U-1-Mfr. of Sec. VIII, Div 1 Pressure Vessels (SHOP ONLY)
Status: 06-14-2024
Number: QA-05742
Manufacture of pressure vessels at the above location with supporting code activities at 2091 Highway 21, RR # 2, Kincardine, ON, N2Z 2X4 controlled by the above location and field sites controlled by the above location (this certificate does not cover impregnated graphite) in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
CSA-B51 Fittings
Status: 06-14-2024
Number: QA-03287
Fabrication of Welded and Non-Welded Category A, B, C, D and H type Fittings only, at the above location, with supporting code activities at 2091 Highway 21, RR # 2, Kincardine, ON, N2Z 2X4 controlled by the above location. In accordance with CSA Standard B51 Boiler, Pressure Vessel and Pressure Piping Code.
Boiler & Pressure Vessel Repair/Alteration (SHOP & FIELD)
Status: 06-14-2024
Number: QA-01166
Repair and alteration of pressure vessels, piping and A, B, C, D, E and H type fittings at the above location with supporting code activities at 2091 Highway 21, RR # 2, Kincardine, ON, N2Z 2X4 controlled by the above location and for repairs and alterations at field sites controlled by this location. In accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Power Piping Installation ASME B31.1 (SHOP & FIELD)
Status: 06-14-2024
Number: QA-01167
Fabrication, assembly and repair of power piping at the above location with supporting code activities at 2091 Highway 21, RR # 2, Kincardine, ON, N2Z 2X4 controlled by the above location and fabrication, assembly, erection and repair of power piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping.
Process Piping Installation ASME B31.3 (SHOP & FIELD)
Status: 06-14-2024
Number: QA-01168
Fabrication, assembly and repair of process piping at the above location with supporting code activities at 2091 Highway 21, RR # 2, Kincardine, ON, N2Z 2X4 controlled by the above location and fabrication, assembly, erection and repair of power piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping.
Vessels, Pumps, Valves, Piping & Containment (N with NA)
Status: 06-14-2024
Number: QA-02105
Construction of Class 1, 1C, 2, 2C, 3, 3C & 4 vessels, piping systems, welded and non-welded supports (with and without design responsibility); Class 2 & 3 storage tanks; Class 1, 1C, 2, 2C, 3, 3C & 4 Shop Assembly; As a Material Organization supplying ferrous and nonferrous material; At the above location and CNSC licensed field sites controlled by the above location; With supporting code activities as described in the Quality Assurance Manual at 2091 Highway 21, RR # 2, Kincardine, N2Z 2X4. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
Parts, Appurtenances, Piping Sub’s & Tubular Prod’s (NPT with NA)
Status: 06-14-2024
Number: QA-10157
Fabrication of Class 1, 1C, 2, 2C, 3, 3C, & 4 parts and appurtenances; With and without design responsibility; At the above location and at CNSC licensed field sites controlled by the above location; With supporting code activities as described in the Quality Assurance Manual at 2091 Highway 21, RR # 2, Kincardine, N2Z 2X4 . In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
CSA-N285.0 Nuclear Fittings (SHOP ONLY)
Status: 06-14-2024
Number: QA-04479
Fabrication of Class 1, 1C, 2, 2C, 3, 3C and 4 Welded and Non-Welded Category A, B, E and H type Fittings; With and without design responsibility; At the above location and supporting code activities as described in the Quality Assurance Manual at 2091 Highway 21, RR # 2, Kincardine, N2Z 2X4. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
CSA-N285.0 Nuclear Fitting Repair or Modification (SHOP & FIELD)
Status: 06-14-2024
Number: QA-04395
Repair or Modification of Class 1, 1C, 2, 2C, 3, 3C and 4 Welded and Non-Welded Category A, B, C, D, E, F and H type Fittings at the above location and at CNSC licensed field sites controlled by the above location; With supporting code activities as described in the Quality Assurance Manual at 2091 Highway 21, RR # 2, Kincardine, N2Z 2X4. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
CSA-N285.0 Nuclear Item Repair, Modification or Replacement (FIELD ONLY)
Status: 06-14-2024
Number: QA-10158
Field Repairs, Modifications or Replacements of Class 1, 1C, 2, 2C, 3, 3C and 4 nuclear items at CNSC licensed field sites controlled by the above location; With supporting code activities as described in the Quality Assurance Manual at 2091 Highway 21, RR # 2, Kincardine, N2Z 2X4. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
Contact(s)