The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
E.S. FOX LTD - KINGSTON
- Address:
-
209 DALTON AVENUE
KINGSTON, ON
Canada
K7K 6C2 - Products/Services:
-
Fitting Manufacturers
Status: 11/17/2022
Number: QA 01207
Fabrication of welded and non-welded Category A, B, C, E and H type fittings only at the above location only in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Medical Gas Piping CSA Z7396.1
Status: 11/17/2022
Number: QA 00821
Fabrication and assembly of nonflammable medical gas piping at the above location and fabrication, assembly and erection of nonflammable medical gas piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and CSA-Z7396.1 Nonflammable Medical Gas Piping Systems.
Power Piping B31.1
Status: 11/17/2022
Number: QA 00819
Fabrication and assembly of power piping at the above location and fabrication, assembly and erection of power piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping.
Process Piping B31.3
Status: 11/17/2022
Number: QA 00820
Fabrication and assembly of process piping at the above location and fabrication, assembly and erection of process piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping.
Refrigeration Piping B31.5
Status: 11/17/2022
Number: QA 00822
Fabrication and assembly of refrigeration piping at the above location and fabrication, assembly and erection of refrigeration piping at field sites controlled by the above location in accordance with CSA Standard B52, Mechanical Refrigeration Code and ASME B31.5 Refrigeration Piping.
Repair and Alteration Organizations
Status: 11/17/2022
Number: QA 00823
Repair and alteration of boilers, pressure vessels, piping and A, B, C, D, E, F and H type fittings at the above location and for repairs and alterations at field sites controlled by this location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Contact(s)