The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
BWXT NUCLEAR ENERGY CANADA INC.
- Address:
-
1160 MONAGHAN RD
PETERBOROUGH, ON
Canada
K9J 0A8 - Products/Services:
-
Vessels, Pumps, Valves, Piping & Containment (N with NA)
Status: 2024-07-22
Number: QA-277
Construction of Class 1, 1C, 2, 2C, 3, 3C & 4 vessels; Class 1, 2 & 3 pumps, line valves and piping systems; Class 2 & 3 storage tanks; Class 1, 1C, 2, 2C, 3, 3C & 4 Shop Assembly; Welded and non-welded supports with and without design responsibility; As a Material Organization supplying ferrous and nonferrous material; At the above location only. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
CSA-N285.0 Nuclear Fittings (SHOP ONLY)
Status: 2024-07-22
Number: QA-00655
Fabrication of Class 1, 1C, 2, 2C, 3, 3C & 4 welded and non-welded category A, B, C, E, F and H type fittings; With and without design responsibility; At the above location only. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
CSA-N285.0 Nuclear Fitting Repair or Modification (SHOP & FIELD)
Status: 2024-07-22
Number: QA-04645
Repair or modification of Class 1, 1C, 2, 2C, 3, 3C & 4 welded and non-welded category A, B, C, E, F and H type fittings at the above location and at CNSC licensed field sites controlled by the above location only. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
CSA-N285.0 Nuclear Fitting Repair or Modification (SHOP & FIELD)
Status: 2024-07-22
Number: QA-04645
Repair, modification or replacement of Class 1, 1C, 2, 2C, 3, 3C & 4 welded and non-welded category A, B, C, E, F and H type fittings; Class 1, 2, 3 & 4 non-welded supports: At the above location and at CNSC licensed field sites controlled by the above location only. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
ASME U-1-Mfr. of Sec. VIII, Div 1 Pressure Vessels (SHOP ONLY)
Status: 2024-06-16
Number: QA-471
Manufacture of pressure vessels at the Above Location Only. In accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
CSA-B51 Fittings
Status: 2024-06-16
Number: QA-391
Fabrication of Welded and Non-Welded Category A, B, C, D, E, F and H type Fittings at the Above Location Only. In accordance with CSA Standard B51 Boiler, Pressure Vessel and Pressure Piping Code.
Boiler & Pressure Vessel Repair/Alteration (SHOP & FIELD)
Status: 2024-06-16
Number: QA-00733
Repair and alteration of boilers, pressure vessels, piping and A, B, C, D, E, F and H type fittings at the above location and for repairs and alterations at field sites controlled by this location. In accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Power Piping Installation ASME B31.1 (SHOP & FIELD)
Status: 2024-06-16
Number: QA-390
Fabrication and assembly of power piping at the above location and fabrication, assembly and erection of power piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping.
Process Piping Installation ASME B31.3 (SHOP & FIELD)
Status: 2024-06-16
Number: QA-03026
Fabrication and assembly of process piping at the above location and fabrication, assembly and erection of process piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping.
Contact(s)