The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
BRUCE POWER INC. MUNICIPALITY OF KINCARDINE
- Address:
-
177 TIE ROAD
TIVERTON, ON
Canada
N0G 2T0 - Products/Services:
-
Fitting Manufacturers
Status: 12/6/2022
Number: QA 02979
Fabrication of Welded and Non-Welded Category B and H type Fittings only at the Above Location Only. In accordance with CSA Standard B51 Boiler, Pressure Vessel and Pressure Piping Code.
Refrigeration Piping B31.5
Status: 12/6/2022
Number: QA 02982
Fabrication and assembly of refrigeration piping at the locations listed in the manual and controlled by above location only in accordance with CSA Standard B52, Mechanical Refrigeration Code and ASME B31.5 Refrigeration Piping.
Power Piping B31.1
Status: 12/6/2022
Number: QA 02980
Fabrication and assembly of power piping at the locations listed in the manual and controlled by the above location only in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping.
Process Piping B31.3
Status: 12/6/2022
Number: QA 02981
Fabrication and assembly of process piping at the locations listed in the manual and controlled by the above location only in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping.
Nuclear Vessels, Pumps, Valves and Piping Systems
Status: 12/6/2022
Number: QA 02973
Construction of Class 1, 2 and 3 Piping Systems; Class 4 Containment Components; Welded and Non welded Supports; Shop Assembly and a Material Organization Supplying Ferrous and Nonferrous Material; at the above location and 835 Fourth Line, Oakville, 60 Industrial Park Rd., Chesley, 457 Side Road 30, Paisley and 380 Gary Street, Kincardine controlled at the above location. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
Nuclear Fittings
Status: 12/6/2022
Number: QA 02976
Fabrication of Class 1, 2, 3 and 4 Welded and Non-Welded Category B and H type Fittings only at the above location only. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
Nuclear Repair, Modification or Replacement
Status: 12/6/2022
Number: QA 02978
Repairs, Modifications or Replacements of Class 1, 1C, 2, 2C, 3, 3C and 4 nuclear items controlled at the above location and 835 Fourth Line, Oakville, 60 Industrial Park Rd., Chesley, 457 Side Road 30, Paisley and 380 Gary Street, Kincardine controlled at the above location. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
Repair and Alteration Organizations
Status: 12/6/2022
Number: QA 02983
Repair and alteration of boilers, pressure vessels, piping and Category A, B, C, D, E, F & H type fittings at the locations listed in the manual and controlled by above location only in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Contact(s)