The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
BRUCE POWER INC
- Address:
-
177 TIE RD
TIVERTON, ON
Canada
N0G 2T0 - Products/Services:
-
Pressure Relief Valve Repair (SHOP ONLY)
Status: 2024-12-16
Number: QA-243
Repair of ASME Section I, IV and VIII, Div.1 pressure relief valves using original equipment manufactured parts at the above location site within station A only. In accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code. Special processes are limited to Machining. Test media shall include Steam, Air/Gas and Liquid.
CSA-N285.0 Nuclear Pressure Relief Valve Repair (SHOP ONLY)
Status: 2024-12-16
Number: QA-403
Repair of nuclear Class 1, 2 and 3 pressure relief valves using original equipment manufactured parts at the above location site within station A only. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants. Special processes are limited to Machining. Test media shall include Steam, Air/Gas and Liquid.
Refrigeration Piping Installation ASME B31.5 (SHOP ONLY)
Status: 2022-12-06
Number: QA-02982
Fabrication and assembly of refrigeration piping at the locations listed in the manual and controlled by above location only in accordance with CSA Standard B52, Mechanical Refrigeration Code and ASME B31.5 Refrigeration Piping.
Boiler & Pressure Vessel Repair/Alteration (SHOP ONLY)
Status: 2022-12-06
Number: QA-02983
Repair and alteration of boilers, pressure vessels, piping and Category A, B, C, D, E, F and H type fittings at the locations listed in the manual and controlled by above location only in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Pressure Relief Valve Repair (SHOP ONLY)
Status: 2024-12-16
Number: QA-244
Repair of ASME Section I, IV and VIII, Div.1 pressure relief valves using original equipment manufactured parts at the above location site within station B only. In accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code. Special processes are limited to Machining. Test media shall include Steam, Air/Gas and Liquid.
CSA-N285.0 Nuclear Pressure Relief Valve Repair (SHOP ONLY)
Status: 2024-12-16
Number: QA-404
Repair of nuclear Class 1, 2 and 3 pressure relief valves using original equipment manufactured parts at the above location site within station B only. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants. Special processes are limited to Machining. Test media shall include Steam, Air/Gas and Liquid.
Vessels, Pumps, Valves, Piping & Containment (N with NA)
Status: 2022-12-06
Number: QA-02973
Construction of Class 1, 2 and 3 Piping Systems; Class 4 Containment Components; Welded and Non welded Supports; Shop Assembly and a Material Organization Supplying Ferrous and Nonferrous Material; at the above location and 835 Fourth Line, Oakville, 60 Industrial Park Rd., Chesley, 457 Side Road 30, Paisley and 380 Gary Street, Kincardine controlled at the above location. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
CSA-N285.0 Nuclear Fittings (SHOP ONLY)
Status: 2022-12-06
Number: QA-02976
Fabrication of Class 1, 2, 3 and 4 Welded and Non-Welded Category B and H type Fittings only at the above location only. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
CSA-N285.0 Nuclear Item Repair, Modification or Replacement (FIELD ONLY)
Status: 2022-12-06
Number: QA-02978
Repairs, Modifications or Replacements of Class 1, 1C, 2, 2C, 3, 3C and 4 nuclear items controlled at the above location and 835 Fourth Line, Oakville, 60 Industrial Park Rd., Chesley, 457 Side Road 30, Paisley and 380 Gary Street, Kincardine controlled at the above location. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
CSA-B51 Fittings
Status: 2022-12-06
Number: QA-02979
Fabrication of Welded and Non-Welded Category B and H type Fittings only at the Above Location Only. In accordance with CSA Standard B51 Boiler, Pressure Vessel and Pressure Piping Code.
Power Piping Installation ASME B31.1 (SHOP ONLY)
Status: 2022-12-06
Number: QA-02980
Fabrication and assembly of power piping at the locations listed in the manual and controlled by the above location only in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping.
Process Piping Installation ASME B31.3 (SHOP ONLY)
Status: 2022-12-06
Number: QA-02981
Fabrication and assembly of process piping at the locations listed in the manual and controlled by the above location only in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping.
Contact(s)