The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
BANTREL CONSTRUCTORS CO
- Address:
-
5915 Airport Rd UNIT 905
Mississauga, ON
Canada
L4V 1T1 - Products/Services:
-
Parts, Appurtenances, Piping Sub’s & Tubular Prod’s (NPT with NA)
Status: 04-30-2024
Number: QA-10102
Fabrication of Class 1, 1C, 2, 2C, 3, 3C, & 4 parts and piping subassemblies; Class 1, 2, 3 & 4 welded and non-welded supports; Without design responsibility; At CNSC licensed field sites only, controlled by the above location only and Field Installation at CNSC licensed field sites only, controlled by the above location only . In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
CSA-N285.0 Nuclear Item Repair, Modification or Replacement (FIELD ONLY)
Status: 04-30-2024
Number: QA-10103
Field Repairs, Modifications or Replacements of Class 1, 1C , 2, 2C, 3, 3C & 4 nuclear items at CNSC licensed field sites controlled by the above location only. In accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants.
Contact(s)