The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
ANTHONY ALLEGRETTI O/A STORM MECHANICAL
- Address:
-
62 HOLLYHEDGE DR
SCARBOROUGH, ON
Canada
M1J 1X4 - Products/Services:
-
Refrigeration Piping Installation ASME B31.5 (FIELD ONLY)
Status: 2023-11-01
Number: QA-05639
Fabrication, assembly and repair of refrigeration piping at field sites controlled by the above location only in accordance with CSA Standard B52, Mechanical Refrigeration Code and ASME B31.5 Refrigeration Piping.
Medical Gas Piping Installation CSA-Z7396.1 (FIELD ONLY)
Status: 2023-11-01
Number: QA-05640
Fabrication, assembly, erection and repair of nonflammable medical gas piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and CSA-Z7396.1 Nonflammable Medical Gas Piping Systems.
Contact(s)