The Technical Standards and Safety Authority (TSSA) adopts standards and administers the policies, procedures and processes for the certification of welders and brazers regulated under the Technical Standards and Safety Act, 2000’s Ontario Regulation 220/01: Boilers and Pressure Vessels (BPVs). Businesses that repair/alter BPVs and install/repair associated piping systems are required to hold a Certificate of Authorization (COA) from TSSA or another Canadian jurisdiction. Companies with a National Board Certificate of Authorization (“R” stamp) are also acceptable for repairs/alterations of BPVs.
In the following directory, you can find a listing of businesses that hold a COA issued by TSSA. Please note that the information in this directory is updated periodically and may not reflect the most recent information available for each entry. If you have a question or concern regarding any of the information contained on this page, please contact customerservices@tssa.org or call 1-877-682-TSSA (8772).
462673 ONTARIO INC O/A NOR ARC STEEL FABRICATOR
- Address:
-
331567 HWY 11
EARLTON, ON
Canada
P0J 1E0 - Products/Services:
-
Fitting Manufacturers
Status: 3/13/2024
Number: QA 04342
Fabrication of Welded and Non-Welded Category B and H type Fittings only at the Above Location Only. In accordance with CSA Standard B51 Boiler, Pressure Vessel and Pressure Piping Code.
Repair and Alteration Organizations
Status: 3/13/2024
Number: QA 04341
Repair and alteration of boilers, pressure vessels, piping and A, B, E and H type fittings at the above location and for repairs and alterations at field sites controlled by this location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Power Piping B31.1
Status: 3/13/2024
Number: QA 04339
Fabrication, assembly and repair of power piping at the above location and fabrication, assembly, erection and repair of power piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping.
Process Piping B31.3
Status: 3/13/2024
Number: QA 04340
Fabrication, assembly and repair of process piping at the above location and fabrication, assembly, erection and repair of process piping at field sites controlled by the above location in accordance with CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping.
Refrigeration Piping B31.5
Status: 3/13/2024
Number: QA 06188
Fabrication, assembly and repair of refrigeration piping at the above location and fabrication, assembly, erection and repair of refrigeration piping at field sites controlled by the above location in accordance with CSA Standard B52, Mechanical Refrigeration Code and ASME B31.5 Refrigeration Piping.
Pressure Vessels Manufacturers - Division 1
Status: 3/13/2024
Number: QA 06189
Manufacture of pressure vessels at the above location only in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and CSA Standard B51, Boiler, Pressure Vessel and Pressure Piping Code.
Contact(s)